Variable Pitch VSR-10 Well MB03 Spring - M140

Variable Pitch VSR-10 Well MB03 Spring - M140

FPS Airsoft Gearbox Variable Pitch VSR MB03 Spring

The FPS spring has been calibrated on the original mechanics of the Well brand MB03 rifle.
In the calibration process, the thickness due to the bearings was not taken into consideration, therefore, with the same initial conditions, an increase in performance of about 2.5 m / s for each bearing must be taken into account.
Of course, with shorter or longer barrels the performance will decrease or increase, so you will switch to the harder or softer calibration.
The FPS spring is 100% Made in Italy and was made in collaboration with leading companies in the sector.
The material used is burnished and pre-hardened carbon steel wire with the addition of silicon and chromium EN10270 / 2.
In the phase immediately following forming, the spring is stabilized in the oven at a temperature of 400 degrees centigrade for thirty minutes in order to optimize its duration over time.
The spring has coils with variable pitch in the central area and in the one in contact with the spring guide and undergoes a grinding process at both ends which guarantees optimal performance in the compression phase.
The dimensions of the product are:
- length: 210 mm
- external diameter: 10.25 mm
- internal diameter: 8mm